Соединения ПВХ и добавки-стабилизаторы ПВХ
- Описание
- Онлайн-запрос
Описание
PVC Compounds Aids UPVC Stabilizer Additives MY-P Brand
PVC Compounds Aids PVC Air Blowing Additives
Speed up the melting of raw materials and improve the unit output. Reduce gel time and maintain normal torque.
Improve the dispersion effect and better product quality. Reduce impact resistance and reduce production cost.
Improve product toughness and better product impact. Improve surface quality and product luster.
Eliminate raw material caking and increase filling dosage. Avoid carbonization deposition and make production more stable
MY Brand PVC Compounds Stabilizer
Product Type | Инъекция | Pipe Profile | Profile | Board | Sheet, film | Wood Plastic | Foam Board/Tube | Plastic tile |
Dosage per hundredth | 0.75-2.0 | 0.75-1.5 | 1.0-2.0 | 1.0-2.0 | 1.0-2.5 | 2.0-3.0 | 1.0-3.0 | 1.0-2.0 |
Note: The above is only a reference dosage, and the specific dosage should be adjusted according to the original formula system and product requirements
Aplication Case
Firstly,Корпус трубы из ПВХ с резьбой
ПВХ | Стабилизатор | СаСо3 | цена за взаимодействие | PE разговор | Стеариновая кислота | ТиО2 | MY-P Brand | |
Оригинальная формула | 100 | 4.0 | 50 | 8 | 0.9 | 0.8 | 0.6 | 0 |
Формула испытательной машины | 100 | 3.8 | 50 | 5 | 0.8 | 0.8 | 0.5 | 1.0 |
Secondly,PVC Water Pipe Case
ПВХ | Стабилизатор | СаСо3 | Флексибилизатор | ACR | PE разговор | Стеариновая кислота | ТиО2 | MY-P Brand | |
Оригинальная формула | 100 | 3.8 | 8 | 6 | 0.8 | 0.8 | 0.8 | 1.0 | 0 |
Формула испытательной машины | 100 | 3.6 | 10 | 3 | 0 | 0.7 | 0.6 | 1.0 | 1.2 |
Thirdly,ПВХ Electric Power Pipe Case
ПВХ | Стабилизатор | СаСо3 | цена за взаимодействие | ACR | PE разговор | Стеариновая кислота | Пигмент | MY-P Brand | |
Оригинальная формула | 50 | 2.6 | 125 | 6 | 1 | 1.0 | 0.8 | Подходящий | 0 |
Формула испытательной машины | 50 | 2.6 | 125 | 3 | 0 | 0.8 | 0.6 | Подходящий | 1.5 |
Особенно,Speed up raw materials melting and improve the unit output.
Reduce gel time and Maintain normal torque. Improve Dispersion effect and Be Better product quality.
Более того,Reduce impact resistance amount and Reduce produce cost.
Improve product toughness and better product impact. Improve surface quality and product gloss.
Remove material caking and Increase filling dosage. Avoid carbonization deposition and make production more stable.
Добро пожаловать, свяжитесь с нами для получения дополнительной информации.