تساعد مركبات PVC على إضافات تثبيت UPVC
- وصف
- الاستفسار عبر الإنترنت
وصف
PVC Compounds Aids UPVC Stabilizer Additives MY-P Brand
PVC Compounds Aids PVC Air Blowing Additives
Speed up the melting of raw materials and improve the unit output. Reduce gel time and maintain normal torque.
Improve the dispersion effect and better product quality. Reduce impact resistance and reduce production cost.
Improve product toughness and better product impact. Improve surface quality and product luster.
Eliminate raw material caking and increase filling dosage. Avoid carbonization deposition and make production more stable
MY Brand PVC Compounds Stabilizer
Product Type | Injection | Pipe Profile | Profile | Board | Sheet, film | Wood Plastic | Foam Board/Tube | Plastic tile |
Dosage per hundredth | 0.75-2.0 | 0.75-1.5 | 1.0-2.0 | 1.0-2.0 | 1.0-2.5 | 2.0-3.0 | 1.0-3.0 | 1.0-2.0 |
Note: The above is only a reference dosage, and the specific dosage should be adjusted according to the original formula system and product requirements
Aplication Case
Firstly,حالة الأنابيب البلاستيكية خيوط
بولي كلوريد الفينيل | مثبت | CaCo3 | CPE | شمع البولي ايثيلين | حامض دهني | TiO2 | MY-P Brand | |
الصيغة الأصلية | 100 | 4.0 | 50 | 8 | 0.9 | 0.8 | 0.6 | 0 |
صيغة آلة الاختبار | 100 | 3.8 | 50 | 5 | 0.8 | 0.8 | 0.5 | 1.0 |
Secondly,PVC Water Pipe Case
بولي كلوريد الفينيل | مثبت | CaCo3 | المرن | أكر | شمع البولي ايثيلين | حامض دهني | TiO2 | MY-P Brand | |
الصيغة الأصلية | 100 | 3.8 | 8 | 6 | 0.8 | 0.8 | 0.8 | 1.0 | 0 |
صيغة آلة الاختبار | 100 | 3.6 | 10 | 3 | 0 | 0.7 | 0.6 | 1.0 | 1.2 |
Thirdly,بولي كلوريد الفينيل Electric Power Pipe Case
بولي كلوريد الفينيل | مثبت | CaCo3 | CPE | أكر | شمع البولي ايثيلين | حامض دهني | الصباغ | MY-P Brand | |
الصيغة الأصلية | 50 | 2.6 | 125 | 6 | 1 | 1.0 | 0.8 | مناسب | 0 |
صيغة آلة الاختبار | 50 | 2.6 | 125 | 3 | 0 | 0.8 | 0.6 | مناسب | 1.5 |
Especially,Speed up raw materials melting and improve the unit output.
Reduce gel time and Maintain normal torque. Improve Dispersion effect and Be Better product quality.
علاوة على ذلك,Reduce impact resistance amount and Reduce produce cost.
Improve product toughness and better product impact. Improve surface quality and product gloss.
Remove material caking and Increase filling dosage. Avoid carbonization deposition and make production more stable.
مرحبا بكم في الاتصال بنا للحصول على مزيد من المعلومات.